Installation
Our products are made of modern materials making them light, strong, durable, and easy to install. They have been used by DIY fanatics and talented professionals for decades.
WallArk products are made of high-quality polymers that combine the strong, workable, quality characteristics of synthetic materials with the look of wood or plaster. All products have been pre-treated with primer to ensure better painting results. Installing is easy with WallArk recommended glues.
First measure up the entire room to calculate how much skirting you need, and always buy extra to account for any mistakes.
Use a handsaw and a mitre box to saw the list to the right angle, or alternatively use a mitre saw and a suitable blade. Treat the cut points with sandpaper (max 150) and remove the sawdust with a damp sponge
Install the mouldings so that the seams are even.
Finish the joints by removing any excess glue and smoothing the seams. Allow to dry for at least six hours, then carefully sand the seams and apply adhesive to the ceiling and wall joints.
Wait at least six hours before painting the mouldings in the hue of your choice, either with a roller or a brush.
On this page you will find installation instructions for WallArk products. However, please contact us if you have any further questions.
